Preparing Data Before Accessing Macros
The following references are selected by default in the DataExplorerProject in the Visual Basic Editor and are required for the macros in the DataExplorer.VB6 file to successfully run:
•Visual Basic For Applications
•Data Explorer 4.0 Type Library
•OLE Automation
•Microsoft Forms 2.0 Object Library
•Microsoft Internet Controls
To view references:
1. Open the DataExplorerProject (select VisualBasicEditor from the Tools menu in the Data Explorer window).
2. Select References from the Tools menu in the Visual Basic Editor.
C.2 Preparing Data | C | |
Before Accessing Macros |
| |
|
|
|
Before you access the toolbox, open data files of interest and: |
| |
| ||
• Smooth the data, if necessary, to reduce noise |
| |
• Set optimum peak detection and labeling |
| |
• Set the display range or zoom as needed |
| |
• Resize and organize the displays as needed |
| |
• Enable Allow Overlapping Labels (select Peak Label |
| |
from the Peaks menu). If overlapping labels are not |
| |
enabled, some peaks may not be labeled. |
|
NOTE: Before using the MS Fit/MS Tag toolbox, additional data preparation is recommended. See Section Using MS Fit/MS Tag Toolbox.
Data Explorer™ Software User’s Guide |