Yamaha 4-axis model, 3-axis model owner manual ZPH Pole type 3rd-axis option, 15 ZPH

Chapter 10 HXYX

3-6 ZPH (Pole type 3rd-axis option)

When ZPH is attached for the 3rd-axis of the pole type, install the tool onto the aluminum bracket at the end of the ZP-axis.

Twelve M6 coarse thread tap holes and two φ6 reamer holes are opened on the bracket.

20

	100
	70
	44
10	32	2-φ6H7 Depth6
			12-M6⋅1.0
		60	110 between knock (0.02) 130
			(Tolerance

Fig. 10-15 ZPH

!CAUTION

If the fitting length is less than 9mm, the threads could be damaged during tightening. If the bolt screw length exceeds 30mm from the installation surface, the screw could contact the Y-axis.

Select the minimum nominal length of the fixing bolt so that the length is 9mm or more from the tool installation surface.

10-16