Yamaha 3-axis model, 4-axis model owner manual Moving arm type 2-axis model

Chapter 8 SXYX

3-2 Moving arm type 2-axis model

For the moving arm type, an aluminum bracket is attached to the end of the Y-axis. Install the tool on this bracket.

Twelve M6 coarse thread tap holes and two φ6 reamer holes are opened on the bracket.

12-M6⋅1.0 through hole

10

110(Tolerance between knock (0.02)

17 10 (Plate thickness)

	100
15	70	5
34	32	35
29	44
		60

50	2-φ6H7 Depth6
	(Tap hole penetration)

Fig. 8-16 Moving arm type

!CAUTION

If the fitting length is less than 9mm, the threads could be damaged during tightening. If the length of the bolt screw is 27mm or more from the installation surface, the screw could contact the Y-axis.

Select the minimum fixing bolt screw length so that the screw fitting length is 9mm or more.

8-13