Yamaha 4-axis model, 3-axis model owner manual Hxylx pole type

Chapter 12 HXYLX
3-3	Pole type 2-axis model
	Four M8 coarse thread tap holes and two $8 reamer holes are opened on the tool
	installation surface of the Y-axis slider. (Refer to Fig. 12-7.) Install the user tool
	onto the Y-axis slider using these holes.
	Four M5 coarse thread tap holes are also opened on the slider side. Use these to
	fix light loads other than the tool, such as a wiring retainer.
		185
		(Tolerance between knock (0.02)
			12.5
			65
	180	160	50

	(Effective female screw depth)
31	30

2-φ8H7 Depth10

4-M8⋅1.25 Depth30

1.5 15

4-M5⋅0.8 Depth15

(The same position on the opposite surface at two locations)

2

Fig. 12-7 HXYLX pole type

Select the under head length of the bolt fixing the tool so that the screw length from the slider installation surface is 16mm or more, 30mm or less.

!CAUTION

If the screw's fitting length is less than 16mm, the screw threads could be dam- aged during tightening. If the screw length from the installation surface is longer than 30mm, the screw end could contact the frame.

12-10