Yamaha 4-axis model, 3-axis model owner manual Ground terminal Ground wire

Chapter 8 SXYX

3)Connect the ground wire to the ground terminal attached to the top of the X-axis wiring box.

Ground terminal

Ground wire

An M4 small screw with spring washer and lock washer are attached to the ground terminal. Arrange the parts in the order of the lock washer, ring-tongue terminal and M4 small screw with spring washer, and then tighten. (Refer to Fig. 8-9.)

M4 small screw with spring washer

Ring-tongue terminal

Lock washer

Fig. 8-9

4)Return the wiring box cover to the original position following steps 1 and 2 in reverse.

Lead out the ground wire from the user wiring outlet on the end face of the X-axis wiring box.

8-8