Yamaha 3-axis model owner manual Motor cover, Removing the motor cover, Installing the motor cover

Chapter 12 HXYLX

5-5-3 Motor cover

Removing the motor cover

1)Cut the Insulock-tie binding the motor cable with a pair of nippers, and re- move.

2)Remove the two M6 hexagon bolts, and pull the motor cover upward and off. (Refer to the following photograph.)

Installing the motor cover

1)Insert the motor cover into the installation hole, and fix with two M6 hexa- gon bolts.

2)Using the φ5 hole open on the motor cover, fix the motor cable with an Insulock-tie.

12-29