Yamaha 3-axis model, 4-axis model SXYBX-ZF XZ type 2-axis, arm type 3rd-axis option, 11 ZF

Chapter 11 FXYBX/SXYBX

Select the under head length of the bolt for fixing the tool so that the screw length from the slider installation surface is 6mm or less.

!CAUTION

Note that if the screw length from the installation surface is 16mm or more, the screw will contact the bottom.

3-3 SXYBX-ZF (XZ type 2-axis, arm type 3rd-axis option)

When using the XZ type 2-axis model or if ZF is attached for the arm type 3rd- axis model, install the workpiece onto the ZF slider in the following manner. Four M5 coarse thread tap holes and a φ5 reamer hole are opened on the slider’s workpiece installation surface. Use these to install the tool.

Four M5 coarse thread tap holes are also opened on the slider side. Use these as required.

	110
	100
	(Tolerance between knock (0.02)
9	9		10
			18
	70	86	50

4-M5⋅0.8 Depth9

4-M5⋅0.8 Depth12

9

2-φ5H7 Depth15

1

Stroke cover

Fig. 11-11 ZF

Select the maximum length so that the screw length of the tool fixing bolt is 12mm or less.

The screw fitting length should be 8mm or more.

!CAUTION

Note that if the screw length from the installation surface is 12mm or more, the screw will contact the bottom.

11-9