Yamaha 3-axis model, 4-axis model owner manual Sxyx

Chapter 8 SXYX

2)When using an air tube, prepare an air coupler for connecting the user air tube with the YAMAHA air tube.

3)Open the X-axis wiring box cover.

Fig. 8-25

4)Place the required cables and air tubes, etc., in the X-axis wiring box. Crimp the enclosed connectors onto the cable beforehand.

5)Connect the connectors, and connect the air tubes with the air couplers.

6)Open the Y-axis wiring box cover.

7)Open holes (or notches) in the rubber grommets attached to the cover, and set the required cables and air tubes, etc., in the Y-axis wiring box. Crimp the enclosed connectors onto the user cables beforehand.

8)Connect the connectors in the same manner as the X-axis, and connect the air tubes with the air couplers.

9)

!CAUTION

Take care not to catch the wiring or air couplers when installing the covers.

When completed with all wiring work, return each wiring box cover to the original positions. Sandwich the X-axis wiring and air tube with the protec- tive material at the wire lead-out port of each wiring box.

8-25