Yamaha 3-axis model, 4-axis model 2-3-1 Arm type with cable carrier

8-7
Chapter 8 SXYX
2-3-1 Arm type with cable carrier
1) Remove the four M4 small screws on the top of the X-axis wiring box, and
loosen the M4 small screw on the end face.
Remove
Loosen
X-axis wiring box
Fig. 8-7
2) Open the X-axis wiring box cover.
Lift up the back of the wiring box, push it forward and then pull it upward
and off. (Refer to Fig. 8-8.)
Fig. 8-8 Opening the wiring box