Yamaha 4-axis model, 3-axis model owner manual XZ type

Chapter 8 SXYX
2-3-3	XZ type
	1) Remove the small screws (M4, 4 screws) fixing the X-axis wiring box cover,
	and remove the cover. (Refer to Fig. 8-12.)

Fig. 8-12

2)Fix the ring-tongue terminal of the ground wire to the ground terminal in the X-axis wiring box.

An M4 small screw with spring washer and lock washer are attached to the ground terminal. Arrange the parts in the order of the lock washer, ring-tongue terminal and M4 small screw with spring washer, and then tighten. (Refer to Fig. 8-13.)

M4 small screw with spring washer

Ring-tongue terminal

Lock washer

Fig. 8-13

3)Return the cover to the original position. Lead out the ground wire from the user wiring outlet on the end face of the X-axis wiring box.

8-10