Yamaha 4-axis model, 3-axis model owner manual 11-18

Chapter 11 FXYBX/SXYBX

10)When completed with all wiring work, return each wiring box cover to the original positions. Sandwich the X-axis wiring and air tube with the protec- tive material at the wire lead-out port of each wiring box.

!CAUTION

Take care not to catch the wiring or air couplers when installing the covers.

rRemove the upper cover of the Y-axis wiring box

When leading out the wires from the Y-axis wiring box,

use the grommets on the upper cover

tCarry out wiring and piping

wSet the harness and air tube from the grommets on the X-axis wiring box

X-axis wiring box end face resin cover

e Carry out wiring and piping qRemove the four M4 screws

Fig. 11-18

11-18