10-24
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)EV2
Chapter10 Managing Your Cisco ONS 15530 System
Updating Functional Images
Note For Cisco ONS 15530 systems with only one CPU switch module, you must either power cycle the shelf
or remove and reinsert the CPU switch module for the functional image upgrade to take affect.
Step8 Switch# copy
ftp:[[[//[username[:password]@]location]/
directory]/filename] {bootflash: |
disk0:}[filename]
Copies the image from the FTP server to the Flash
memory device.
Reply to any CLI prompts for additional
information or confirmation. The prompting
depends on how much information you provide in
the copy command.
Note Wait until after the download finishes
before attempting any commands on the
switch. Confirm that the image download
is done in binary mode and check file sizes
before and after download.
Step9 Switch# show {sby-bootflash: | sby-disk0:} Verifies that space is available in Flash memory on
the standby CPU switch module. If space is
available, continue to Step12.
Step10 Switch# delete {sby-bootflash: |
sby-disk0:}filename (Optional) Deletes a file from Flash memory.
Step11 Switch# squeeze sby-bootflash: (Optional) Recovers the space in onboard Flash
memory.
Step12 Switch# copy
ftp:[[[//[username[:password]@]location]/
directory]/filename] {sby-bootflash: |
sby-disk0:}[filename]
Copies the image from the FTP server to the Flash
memory device.
Reply to any CLI prompts for additional
information or confirmation. The prompting
depends on how much information you provide in
the copy command.
Note Wait until after the download finishes
before attempting any commands on the
switch. Confirm that the image download
is done in binary mode and check file sizes
before and after download.
Step13 Switch# reprogram {sby-bootflash: |
sby-disk0:}filename {slot | sby-rommon}Updates the functional image on the standby CPU
switch module and returns the standby CPU
switch module to ROMMON mode.
Step14 rommon 1 > boot [{bootflash: | disk0:}filename] (Optional) Boots the IOS system image on the
standby CPU switch module if it does not boot
automatically.
Step15 Switch# redundancy switch-activity [force] Switches over control to the standby CPU switch
module.
Repeat Step 13 through Step 14 on the new
standby CPU switch module.
Command Purpose