A-7
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
APS Commands
aps enable
To enable APS activity between an associated interface pair, use the apsenable command. To disable
APS activity, use the aps disable command.
aps enable
Syntax Description This command has no other arguments or keywords.
Defaults None
Command Modes APS configuration
Command History
Usage Guidelines After changing the APS configuration of an associated interface pair, use this command to enable APS
activity between the interfaces.
Examples The following example shows how to enable APS activity between associated transparent interfaces.
Switch# configure terminal
Switch(config)# redundancy
Switch(config-red)# associate group london
Switch(config-red-aps)# aps working transparent 2/0/0
Switch(config-red-aps)# aps protection transparent 4/0/0
Switch(config-red-aps)# aps enable
Related Commands
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
aps disable Disables APS activity between associated interfaces.
associate group Creates an APS group and enters APS configuration mode.