A-136
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
OSCP Commands
show oscp statistics
To display OSCP (Optical Supervisory Channel Protocol) Hello statistics, use the show oscp statistics
command.
show oscp statistics [wave slot/subcard]
Syntax Description
Defaults Displays OSCP statistics for all OSC wave interfaces in the system.
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to display OSCP Hello statistics for an OSC interface.
This command displays the following OSCP statistics, which can be used to debug the OSCP.
•hold down—Shows how many times a hold down has been applied to avoid excessive generation of
OSCP Hello packets.
•Hello Tx pkts and Hello Rx pkts—Shows the number of OSCP Hello packets that have been
transmitted and received at an interface.
•OSCP go down—Shows the number of times an OSC interface has gone out of two-way state.
wave slot Specifies an OSC wave interface.
Release Modification
12.1(10)EV2 This command was introduced.