A-168
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
CPU Switch Module Redundancy Commands
show redundancy states
To display internal redundancy software state information, use the show redundancy states command.
show redundancy states
Syntax Description This command has no other arguments or keywords.
Defaults None
Command Modes EXEC and privileged EXEC
Command History
Usage Guidelines Use this command to display internal redundancy software state information, which may be used to
debug redundancy software.
Examples The following example shows how to display internal redundancy software state inf or mat ion. (Se e
Table A -33 for field descriptions.)
Switch> show redundancy states
my state = 13 -ACTIVE
peer state = 8 -STANDBY HOT
Mode = Duplex
Unit ID = 6
Split Mode = Disabled
Manual Swact = Enabled
Communications = Up
client count = 5
client_notification_TMR = 30000 milliseconds
keep_alive TMR = 5000 milliseconds
keep_alive count = 1
keep_alive threshold = 10
RF debug mask = 0x0
Release Modification
12.1(10)EV2 This command was introduced.
TableA-33 show redundancy states Field Descriptions
Field Description
my state Shows the state of the active CPU switch module.
peer state Shows the state of the peer (or standby) CPU switch module.