A-98
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Interface Configuration Commands
trunk laser alarm enable Shows the status of the trunk laser alarm. If enabled, the system will
signal when laser failure occurs.
loss of light Indicate whether there is a loss of light condition.
trunk laser deviation alarm Shows the status of the wavelength deviation alarm. If enabled, the
system will signal when there is a deviation in the functioning of the
laser.
LSC Indicates whether laser safety control is enabled from the CLI (valid
only on wave interfaces).
quick shutdown (FLC) Indicates whether forward laser control is enabled on the interface
(valid only on wave interfaces).
wavelength select Indicates whether a transponder line card is transmitting the lower
wavelength (lo wlen) or the higher wavelength (hi wlen).
CDR control and status: Shows the CDR (clock and data recovery) control and status
information.
loss of lock Indicated whether there is a loss of lock condition.
loss of lock enable Indicates whether loss of lock monitoring is enabled on the interface
via the monitor enable command.
SerDes control and status: Shows the SerDes (serializer/deserializer) information.
GE handler control and status: Shows Gigabit Ethernet control and status information.
loss of sync Indicates whether there is a loss of synchronization for the signal.
This field is only valid if protocol encapsulation is Gigabit Ethernet,
and monitoring is enabled.
loss of sync enable Indicates whether loss of synchronization monitoring is enabled via
the monitor enable command.
FC/ESCON handler control
and status: Shows Fibre Channel and ESCON control and status information.
loss of sync Indicates whether there is a loss of synchronization for the signal.
This field is only valid if protocol encapsulation is Fibre Channel or
ESCON, and monitoring is enabled.
loss of sync enable Indicates whether loss of synchronization monitoring is enabled via
the monitor enable command.
SONET handler control and
status: Shows SONET control and status information.
loss of frame Indicates whether there is a loss of frame for the signal. This field is
only valid if protocol encapsulation is SONET, and monitoring is
enabled.
severely errored frame Indicates whether there is a severely errored frame in the signal. This
field is only valid if protocol encapsulation is SONET, and
monitoring is enabled.
TableA-11 show controllers Command Field Descriptions for Transparent Interfaces (continued)
Field Description