A-150
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
CPU Switch Module Redundancy Commands
redundancy reload peer
To reload the standby CPU switch module, use the redundancy reload peer command.
redundancy reload peer
Syntax Description This command has no other arguments or keywords.
Defaults None
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to reload the standby (or peer) CPU switch module.
The active CPU switch module is allowed to reload a standby CPU switch module that is fully runni n g
the Cisco IOS software by using an NMI (non-maskable interrupt).
This command will not succeed on the active CPU switch module if the stan dby CPU switch module has
not fully loaded its system IOS image and reached the hot-standby state.
This command cannot be entered on the standby CPU switch mo dule .
Examples The following example shows how to reload the standby CPU switch module .
Switch# redundancy reload peer
Reload peer [confirm] y
Preparing to reload peer
Related Commands
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
maintenance-mode Enables or disables CPU switch module redundancy synchronization.
redundancy reload shelf Reloads both CPU switch modules in the shelf.
redundancy switch-activity Manually switches activity from the active CPU switch module to the
standby CPU switch module.
reload Reloads the active CPU switch module.
show redundancy Displays CPU switch module redundancy status and configuration
information.