A-40
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
APS Commands
aps timer message max-interval Modifies the APS Channel Protocol maximum inactivity
interval timer value.
aps timer search-for-up Modifies the minimum and maximum timer intervals on an APS
timer that the system must wait for a splitter protection
connection to come up when both connections are down.
aps timer switchover-enable
min-interval Modifies the minimum timer interval before reenabling APS
switchover.
aps timer wait-to-restore Modifies the number of seconds an APS timer must wait before
switching back to the preferred working signal.
apsworking Explicitly configures the working interface of an associated
interface pair.
aps y-cable Configu res y-c able li ne ca rd prot ect ion.
associate group Creates or specifies an APS interface group and enters APS
configuration mode.
associate interface Associates wavepatch interfaces for APS splitter protection.
show aps trace Shows APS and APS Channe l Pr otocol ac tivity inform ation .
Command Description