A-16
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
APS Commands
5. Signal degrade on the working or protection path
6. Manual signal switchover
If a request or condition of a higher priority is in effect, a lower priority request is rejected.
Note The associated group names are case sensitive and must be entered exactly as they are shown in the
show aps command output.
Examples The following example shows how to make a manual switchover request from the working path to the
protection path for an associated interface pair named blue.
Switch# aps switch blue manual working-to-protection
The following example shows how to make a force switchover request from the working to the protection
path for an associated interface pair with the default group name.
Switch# aps switch Wavepatch2/0/0 force protection-to-working
Related Commands Command Description
apsclear Clears APS switchover or lockout.
apslockout Prevents switchover to the protection interface.
associate group Creates an APS group and enters APS configuration mode.
associate interface Associates multiple wavepatch interface pairs for APS protection.
show aps Displays APS configuration and operation information.