A-172
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
SNMP Commands
SNMP Commands
This section contains the CiscoONS 15530-specific SNMP commands. For the complete list of SNMP
commands supported on the Cisco ONS15530, and their descriptions, refer to Cisco I OS Con f i guration
Fundamentals Command Reference publication.
snmp-server enable traps aps
To enable SNMP trap notifications for APS activity, use the snmp-server enable traps aps command.
To disable this feature, use the no form of the command.
snmp-server enable traps aps
no snmp-server enable traps aps
Syntax Description This command has no other arguments or keywords.
Defaults Disabled
Command Modes Global configuration
Command History
Usage Guidelines Use this command to enable the SNMP trap notifications defined in the APS MIB (CISCO-APS-MIB).
The snmp-server enable traps aps command is used in conjunction with the snmp-server host
command. For a host to receive SNMP trap notifications for APS activity, the snmp-server enable traps
aps command and the snmp-server host command for th at ho st m ust b e en ab le d.
Examples The following example shows how to enable SNMP trap notifications for APS activity.
Switch# configure terminal
Switch(config)# snmp-server enable traps aps
Related Commands
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
associate interface Specifies interfaces to be associated and enters APS configuration mode.
show aps Displays APS configuration information and status.
show running-config Displays the configuration information currently running on the s ystem .
snmp-server host Specifies the recipient for SNMP notification messages.