A-57
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Debug Commands
debug ports
To debug port operations, use the debug ports command. To disable debugging for port operations, use
the no form of this command.
debug ports {connect | errors [type slot[/subcard[/port]]] | events [type slot[/subcard[/port]]] |
patch}
no debug ports {connect | errors [type slot[/subcard[/port]]] | events [type slot[/subcard[/port]]] |
patch}
Syntax Description
Defaults Disabled
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to debug common software errors and events, patch connection activity, and cross
connection activity. If the interface option is not specified, debugging is enabled for all interfaces.
To disable all debugging, use the undebugall command.
Examples The following example shows how to enable error de buggi ng for t ra nsp ar en t i nte rfac e 2/0 /0 .
Switch# debug ports errors transparent 2/0/0
Related Commands
connect Enables debugging for cross connection.
errors Enables debugging for internal software error conditions.
type slot[/subcard[/port]] Specifies an interface on which debugging is enabled. Valid type
values are filter, filterband, filtergroup, tengigthernetphy,
thru, transparent, wave, waveethernetphy, wavepatch, and
wdm. (Optional)
events Enables debugging for internal software event conditions.
patch Enables debugging for patch connections.
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
clock rate Configures a clock rate on a transparent interface.
encapsulation Configures the encapsulation of the client signal on the transparent
interface.