A-157
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
CPU Switch Module Redundancy Commands
show redundancy capability
To display capabilities of the active and standby CPU switch modules, use the show redundancy
capability command.
show redundancy capability
Syntax Description This command has no other arguments or keywords.
Defaults None
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to display hardware and functional versions of the various components. If the
capabilities do not match, the system is running in a degraded redundancy mode.
Examples The following example shows how to display capabilities for the active and standby CPU switch
modules. (See Table A- 28 for field descriptions.)
Switch# show redundancy capability
CPU capability support
Active CPU Sby CPU Sby Compat CPU capability description
---------- ---------- ----------- ----------------------------------------
96 MB 96 MB OK CPU DRAM size
32 MB 32 MB OK CPU PMEM size
512 KB 512 KB OK CPU NVRAM size
16 MB 16 MB OK CPU Bootflash size
3.5 3.5 OK CPU hardware major.minor version
1.20 1.18 OK CPU functional major.minor version
Linecard driver major.minor versions, (counts: Active=18, Standby=18)
Active CPU Sby CPU Sby Compat Drv ID Driver description
---------- ---------- ----------- ------ -----------------------------------
1.1 1.1 OK 0x1000 CPU w/o Switch Fabric
1.1 1.1 OK 0x1001 Fixed Transponder, w/monitor
1.1 1.1 OK 0x1002 Fixed Transponder, no monitor
1.1 1.1 OK 0x1003 Pluggable Transponder, w/monitor
1.1 1.1 OK 0x1004 Pluggable Transponder, no monitor
1.1 1.1 OK 0x1005 Line Card Motherboard
1.1 1.1 OK 0x1006 Backplane
1.1 1.1 OK 0x1007 32-ch Mux/Demux
1.1 1.1 OK 0x1008 Fixed 4-ch Mux/Demux, no OSC
Release Modification
12.1(10)EV2 This command was introduced.