A-230
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Topology Neighbor Commands
The following example shows how to display detailed network topology neighbor in forma ti on for t h e
shelf. (See Table A -51 for field descriptions.)
Switch# show topology neighbor detail
Physical Topology:
Local Port: Wdm0/0
Neighbor Node : ham2
Neighbor Port : Wdm0/1
Neighbor Agent Address: 1.1.1.10
Neighbor Discovery : Via CDP (Proxy Port: Wave2/1)
Link Direction : Both
Local Port: Wdm0/1
Neighbor Node : ham2
Neighbor Port : Wdm0/0
Neighbor Agent Address: 172.20.42.27
Neighbor Discovery : Via CDP (Proxy Port: Wave2/0)
Link Direction : Both
Related Commands
TableA-51 show topology neighbor detail Field Descriptions
Field Description
Local Port Identifies the local port.
Neighbor Node Identifies the neighbor node.
Neighbor Port Identifies the port on the neighbor node.
Neighbor Agent Address Identifies the IP address of the topology agent on the neighbor node.
Neighbor Discovery Indicates how the topology neighbor was discovered, either automatically
via CDP or manually via the CLI.
Command Description
show topology Displays global physical topology configuration.
snmp-server enable traps topology Configures the network topology SNMP trap notification
throttle interval.
topology neighbor Adds a static entry for an interface to the network topology.
topology neighbor agent ip-address Specifies the network management agent ad dress on a remote
node.
topology neighbor cdp Enables CDP on wdm interfaces.
topology neighbor disable Removes an interface from the network topology.
topology hold-time Modifies the interval to hold a nonstatic topology node entry.