A-6
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
APS Commands
aps disable
To disable APS activity between an associated int erface pa ir , us e the apsdisable command. To reenable
APS activity, use the aps enable command.
aps disable
Syntax Description This command has no other arguments or keywords.
Defaults None
Command Modes APS configuration
Command History
Usage Guidelines Before changing the APS configuration of an associated interface pair, use this command to disable APS
activity between the interfaces. When an interface pair is initially associated, APS activity is disabled.
Examples The following example shows how to disable APS activity between associated transparent interfaces.
Switch# configure terminal
Switch(config)# redundancy
Switch(config-red)# associate group newyork
Switch(config-red-aps)# aps disable
Related Commands
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
aps enable Enables APS activity between associated interfaces.
associate group Creates an APS group and enters APS configuration mode.