A-104
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Interface Configuration Commands
Channel
Frequency
Wavelength
Shows the channel number, frequency, and
wavelength of the wave interface.
Splitter Protected Shows whether the interface is splitter protected.
Receiver power level Shows the receiver power level.
Note This field is not present in the OSC wave
interface output.
Laser safety control Shows whether laser safety control is enabled.
Forward laser control Shows whether forward laser control is enabled.
Osc physical port Shows whether the interface is an OSC physical
port.
Wavelength used for inband management Shows whether the interface is used for inband
management.
Configured threshold group Shows whether a threshold group has been
configured for the interface.
Section code violation error count (bip1) Shows the number of BIP1 errors.
Number of errored seconds (es) Shows the number of errored seconds.
Number of severely errored seconds (ses) Shows the number of severely errored seconds.
Number of severely errored framing seconds
(sefs) Shows the number of severely errored framing
seconds.
Number of times SEF alarm raised Shows the number of times the SEF alarm was
raised.
Number of times SF threshold exceeded Shows the number of times the signal failure (SF)
threshold was exceeded.
Number of times SD threshold exceeded Shows the number of times the signal degrade
(SD) threshold was exceeded.
Loopback not set Shows whet her loop ba ck is e na ble d.
Last clearing of “show interface” counters Shows the last time “show interface” counters
were cleared.
Hardware is data_only_port Shows the interface type.
TableA-14 show interfaces wave Field Descriptions (continued)
Field Description