A-137
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
OSCP Commands
Examples The following example shows how to display OSCP control statistics for an OSC interface. (See
Table A -25 for field descriptions.)
Switch# show oscp statistics wave 3/0
OSCP Hello Statistics:
interface Wave3/0
Event Count
~~~~~~~~~~~~ ~~~~~~~~~~
hold down 3
Hello Tx pkts 2262
Hello Rx pkts 2259
Hello discards in 0
Hello discards out 0
OSCP go down events 2
Event Time (seconds)
~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~
Next Tx Hello due 2
Last Hello sent 2
Last Hello received 4
Inactivity interval 25.0
Time until port dropped 20
Related Commands
TableA-25 show oscp statistics Field Descriptions
Field Description
hold down Shows how many times a hold down has been applied to avoid
excessive generation of OSCP Hello packets.
Hello Tx pkts Shows the number of Hello transmissions that have been sent.
Hello Rx pkts Shows the number of Hello transmissions that have been received.
Hello discards in Shows the number of incoming Hello transmissions that have been
discarded.
Hello discards out Shows the number of outgoing Hello transmissions that have been
discarded.
OSCP go down events Shows the number of times that the OSCP (Optical Supervisory
Channel Protocol) has gone down.
Next Tx Hello due Shows the number of seconds before the next transmit Hello packet
is due.
Last Hello sent Shows the number of seconds since a Hello packet was sent.
Last Hello received Shows the number of seconds since a Hello packet was received.
Inactivity interval Shows the number of seconds for the inactivity interval.
Time until port dropped Shows the number of seconds allowed until the port is dropped.
Command Description
oscp timer hello holddown Modifies the OSCP timer Hello hold-down interval.
oscp timer hello interval Modifies the OSCP timer Hello interval.