A-217
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Threshold Commands
show threshold-list
To display information about alarm threshold lists, use the show threshold-list command.
show threshold-list [name]
Syntax Description
Defaults Displays information about all threshold lists in the system.
Command Modes EXEC and privileged EXEC
Command History
Usage Guidelines Use this command to display the threshold v alues conf igured for all alarm threshold lists or for a specifi c
alarm threshold list.
Examples The following example shows how to display information for alarm threshold list named sonet-counters.
(See Tabl e A-46 for field descr iptions. )
Switch# show threshold-list
Threshold List Name: sonet-counters
Notification throttle timer : 5 (in secs)
Threshold name : sonet-sdh section cv Severity : Degrade
Value : 10e-9
APS Trigger : Not set
Description : SONET BIP1 counter
Threshold name : sonet-sdh section cv Severity : Failure
Value : 10e-6
APS Trigger : Set
Description : SONET BIP1 counter
name Specifies the name of an alarm threshold list.
Release Modification
12.1(10)EV2 This command was introduced.
TableA-46 show threshold-list Field Descriptions
Field Description
Threshold List Name Shows the name of the threshold list.
Notification throttle timer Shows, in seconds, the interval in which no more than one threshold
alarm notification can be generated. If more than one notification is
generated during the hold-down period, the extra notifications are
delayed.