Cisco Systems 15530 manual - page 6

Contents
vi
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)EV2
Configuring Privileged EXEC Mode Access on the Standby CPU Switch Module 3-20
Displaying the Standby CPU Switch Module Privileged EXEC Mode Status 3-20
About the Software Configuration Regist er 3-21
Software Configuration Register Settings 3-22
Boot Field Values 3-23
Default System Boot Behavior 3-24
Boot Command 3-24
Changing the Software Configuration Register 3-25
Verify the Configuration Register Value 3-25
CHAPTER 4Configuring ESCON Signal Aggregation 4-1
About ESCON Signal Aggregation Support 4-1
Configuring ESCON Multiplexing Line Card Interfaces 4-2
Displaying the ESCON Multiplexing Line Card Interface Configuration 4-3
Configuring 10-Gbps ITU Trunk Card Interfaces 4-5
Displaying the 10-Gbps ITU Trunk Card Interface Configuration 4-6
Configuring 10-GE Uplink Card Interfaces 4-8
Displaying the 10-GE Uplink Card Interface Configuration 4-9
About Cross Connections 4-11
Configuring Cross Connections 4-11
Displaying the Cross Connection Configuration 4-12
About Alarm Thresholds 4-12
Configuring Alarm Thresholds 4-13
Displaying the Alarm Threshold Configuration 4-14
About Patch Connections 4-15
Configuring Patch Connections 4-15
Displaying Patch Connections 4-16
CHAPTER 5Configuring Transponder Line Card Interfaces 5-1
Configuring Protocol Encapsulation or Clock Rate 5-2
Displaying Protocol Encapsulation or Clock Rate Configuration 5-5
About Transponder Line Card Channel Frequencies 5-6
Configuring Transponder Line Card Channel Frequency 5-6
Displaying Transponder Line Card Channel Frequency 5-6
About Protocol Monitoring 5-7
Configuring Protocol Monitoring 5-8
Displaying Protocol Monitoring Configuration 5-8