A-166
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
CPU Switch Module Redundancy Commands
show redundancy running-config-file
To display the running configuration on the standby CPU switch module, use the show redundancy
running-config-file command.
show redundancy running-config-file
Syntax Description This command has no other arguments or keywords.
Defaults None
Command Modes EXEC and privileged EXEC
Command History
Usage Guidelines This command is only available on the standby CPU switch module. It shows the stored running-config
file that has been synchronized from the active CPU switch module, which will be applied as the system
configuration during the next standby to active transition.
If auto-synchronization is disabled for the running-config-file on the active CPU switch module, or if
the IPC (interprocessor communications) is down, this command displays the message
running-config-file is not currently valid and does not show the running-config-file.
Note While the standby CPU switch module remains in the hot-standby state , t he r unnin g con figurat ion,
as shown by the show running-config command, is not expected t o mat ch t he sy nc hro niz ed
running-config file. Instead, it contains mostly default configuration values.
Examples The following example displays the running-config file on the sta ndby CPU switc h m od ule.
sby-Switch# show redundancy running-config-file
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Switch
!
boot system flash bootflash:ons15530-i-mz
boot bootldr slot0:ons15530-i-mz
<Information deleted>
Release Modification
12.1(10)EV2 This command was introduced.