10-28
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)EV2
Chapter10 Managing Your Cisco ONS 15530 System
Updating Functional Images
Example
The following example shows how to download a functional image from an FTP server:
Switch# show disk0:
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. image 1BD2EA73 2A7B24 26 2652836 Feb 11 2002 18:07:41 ons15530-i-mz
2 .. config 36DC62E3 2AAC54 14 12461 Feb 11 2002 18:10:34 running-config
17912748 bytes available (2665556 bytes used)
Switch# copy ftp://myuser:mypass@theserver/tftpboot/fi-ons15530-escon.A.2-36.exo
disk0:fi-ons15530-escon.A.2-36.exo
Accessing ftp://theserver/tftpboot/ONS15530_RM.srec...Translating "theserver"...domain
server (192.168.2.132) [OK]
Loading ONS15530_RM.srec from 192.168.2.132 (via Ethernet3/0):
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
[OK - 623492/17912748 bytes]
623492 bytes copied
Updating the Line Card Functional Image
To update a line card functional image from a Flash memory device to a hardware controller, use the
following command in privileged EXEC mode from a console session:
The reprogram command checks the compatibility of the image for the selected card type before
downloading the functional image.
Caution The download process impacts traffic through the line card.
Caution Do not interrupt the download process. Wait until it has finished before attempting any commands
on the switch.
Example
The following example demonstrates loading the functional image fpga_image from the CompactFlash
Card to the controller for the processor in slot8.
Switch# reprogram disk0:fpga_image 8
Command Purpose
reprogram device:filename slot Updates the functional image with the
specified filename to a device.