Cisco Systems 15530 Updating the Module Functional Image

10-33
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)EV2
Chapter10 Managing Your Cisco ONS 155 30 System
Updating Functional Images
Updating the Module Functional Image
To update a module functional image from a Flash memory device to a hard war e co nt ro ller, use th e
following command in privileged EXEC mode from a console session:
The reprogram command checks the compatibility of the image for the selected card type before
downloading the functional image.
Caution The download process impacts traffic through the module.
Caution Do not interrupt the download process. Wait until it has finished before attempting any commands
on the switch.
Example
The following example demonstrates loading the functional image fpga_image from the CompactFlash
Card to the controller for the processor in slot8.
Switch# reprogram disk0:fpga_image 2 0
Command Purpose
reprogram device:filename slot subcard Updates the functional image with the
specified filename to a device.