A-5
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
APS Commands
Related Commands Command Description
aps disable Disables APS activity between associated interfaces.
aps enable Enables APS activity between associated interfaces.
aps revertive Configures revertive APS for y-cable line card protection.
aps timer message holddown Modifies the APS Channel Protocol message holddown timer interval
and message count value.
aps timer message
max-interval Modifies the APS Channel Protocol maximum inactivity interval
timer value.
aps timer search-for-up Modifies the minimum and maximum timer intervals on an APS
timer. The system must wait for a splitter protection connection to
come up when both connections are down.
aps timer switchover-enable
min-interval Modifies the minimum timer interval before reenabling APS
switchover.
aps timer wait-to-restore Modifies the number of seconds an APS timer must wait before
switching back to the preferred working signal.
apsworking Configures the working interface of an associated interface pair.
aps y-cable E nables y- cable prot ection .
associate group Creates an APS group and enters APS configuration mode.
associate interface Associates multiple wavepatch interface pairs for APS protection.
show aps Displays APS configuration information and status.