A-110
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Interface Configuration Commands
show patch
To display the patch connections, use the show patch command.
show patch [detail]
Syntax Description
Defaults Displays summary patch connection information.
Command Modes EXEC and privileged EXEC
Command History
Usage Guidelines Use this command to display the patch connections on the OADM modules configured with the patch
command.
The error field in the show patch command output helps troub lesho ot sh elf m iscon figurations. W hen
there is a channel mismatch between a transponder line card and an OADM module, “Channel
Mismatch” appears for the patch connection. When more than one OADM module drops the same
channels, “Channel Mismatch” appears for all patch connections.
Examples The following example shows how to display patch connection information. (See Table A- 18 for field
descriptions.)
Switch# show patch
Patch Interface Patch Interface Type Dir Error
------------------ ------------------ --------- ---- ----------------
Oscfilter0/1 Wave2/1 USER Both
Oscfilter0/0 Wave2/0 USER Both
Filter0/1/2 Wavepatch10/0/0 USER Both
Filter0/0/1 Wavepatch8/0/0 USER Both
Filter0/1/1 Wavepatch8/0/1 USER Both
Filter0/1/3 Wavepatch4/0/0 USER Both
Filter0/0/2 Wavepatch7/0/1 USER Both
detail Displays both the user and automatic local path connections.
Release Modification
12.1(10)EV2 This command was introduced.