A-148
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
CPU Switch Module Redundancy Commands
redundancy manual-sync
To cause an immediate one-time database update of the specified database informat ion, use the
redundancy manual-sync command.
redundancy manual-sync {running-config | startup-config | both}
Syntax Description
Defaults None
Command Modes Privileged EXEC
Command History
Usage Guidelines This command is not usually required because automatic synchronization is enabled by default and, upon
exiting global configuration mode, the running configuration is updated on the standby CPU switch
module. (Exit global configuration mode by entering Ctrl-Z or end.) The star tup co nfiguration i s
updated when the copy command is issued.
If auto-synchronizing is disabled, the redundancy manual-sync command updates the standby
processor database information to be identical with the active CPU switch module.
If the system is unable to complete the update, an error m ess age is disp laye d.
This command is only allowed on the active CPU switch module.
Examples The following example shows how to make the active CPU switch module send an upd ate f or both the
running configuration and the startup configuration to the standby CPU switch module .
Switch# redundancy manual-sync both
running-config Causes an immediate one-time update of the running configuration to the
standby CPU switch module.
startup-config Causes an immediate one-time update of the startup configuration to the
standby CPU switch module.
both Causes an immediate one-time update of the running configura tion and the
startup configuration to the standby CPU switch module.
Release Modification
12.1(10)EV2 This command was introduced.