Cisco Systems 15530 Topology Neighbor Commands, show topology

A-227
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Topology Neighbor Commands
Topology Neighbor Commands
Use the following commands to configure and monitor network to polo gy n eigh bor s.
show topology
To display information about the global physical network topology configuration, use the show topology
command.
show topology
Syntax Description This command has no other arguments or keywords.
Defaults None
Command Modes EXEC and privileged EXEC
Command History
Usage Guidelines Use this command to display the global physical network topology configuration information.
Examples The following example shows how to display the topology hold-time inter val. (See Table A -49 for field
descriptions.)
Switch# show topology
Global Physical Topology configuration:
Maximum Hold Time = 300 secs
Trap interval = 60 secs
Release Modification
12.1(10)EV2 This command was introduced.
TableA-49 show topology hold-time Field Descriptions
Field Description
Maximum Hold Time Shows the maximum number of seconds a dynamically generated topology
entry will remain before it times out.
Trap interval Shows the number of seconds for th e topolo gy SNMP trap no tification
throttle interval.