A-212
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
System Management Commands
Port Number [33434]: Specifies the destination port used by the UDP probe messages.
The default is 33434.
Loose, Strict, Record,
Timestamp, Verbose [none]: Specifies the IP header options. You can specify any
combination. The traceroute command issues prompts for the
required fields. Note that trace will place the requested options in
each probe; however, there is no guarantee that all routers (or end
nodes) will process the options. The default is no header options.
The options are:
•Loose—Allows you to specify a list of nodes that must be
traversed when going to the destination.
•Strict—Allows you to specify a list of nodes that must be the
only nodes traversed when going to the destination.
•Record—Allows you to specify the number of hops to leave
room for.
•Timesta mp—Allows you to specify the number of time
stamps to leave room for.
•Verb os e—If you select any of the above options, the verbose
mode is automatically selected and the traceroute command
prints the contents of the option field in any incoming
packets. You can prevent verbose mode by selecting it again,
toggling its current setting.
TableA-45 traceroute Command Prompt Descriptions (continued)
Prompt Description