A-2
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
APS Commands
aps clear
To clear an APS switchover request or an APS lockout request, use the aps clear command.
aps clear group-name
Syntax Description
Defaults None
Command Modes Privileged EXEC
Command History
Usage Guidelines The CiscoONS 15530 supports APS signal switchover requests from the CLI (command-line interface).
These requests have priorities based on the condition of the protection signal and the existence of another
switchover or lockout request. Three types of requests exist:
•Lockout requests—Have the highest priority and take effect regardless of the condition of the
protection signal. A lockout prevents the signal from switching over from the working interface to
the protection interface.
•Forced switchover requests—Have the next highest priority and are only prevented when an existing
lockout on the protection interface or the protection signal has failed.
•Manual switchover requests—Have the lowest priority and only occur if there is no protection path
lockout, a forced switchover, or the signal has failed or degraded.
Examples The following example shows how to clear an APS request on an associated inter face pair named blue.
Switch# aps clear blue
The following example shows how to clear an APS request for an associated interface pair with the
default group name.
Switch# aps clear Wavepatch2/0/0
Related Commands
group-name Specifies the name of the associated pair of interfaces.
Release Modification
12.1(10)EV2 This command was first introduced.
Command Description
apslockout Prevents switchovers to the protection path.
apsswitch Requests an APS switchover.
show aps Displays APS configuration information and status.