Cisco Systems 15530 Debug Commands, debug aps

A-43
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Debug Commands
Debug Commands
Use the following commands to debug the Cisco ONS 15530. For information on other debug commands
refer to the Cisco IOS Debug Command Reference document.
debug aps
To debug APS operation, use the debugaps command. To disable APS debugging, use the no form of
this command.
debug aps
no debug aps
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines To turn off all debugging, use the undebug all command.
Examples The following example shows how to enable debugging of APS operations.
Switch# debug aps
Related Commands
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
associate group Creates or specifies an APS interface group and enters APS configuration
mode.
associate interface Associates wavepatch interfaces for APS splitter protection.
undebug all Disables all debugging.