A-107
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Interface Configuration Commands
show optical filter
To display information about the channels supported by the OADM modules, use the show opti cal filter
command.
show optical filter [detail]
Syntax Description
Defaults Displays only the channels supported by the OADM modules.
Command Modes EXEC and privileged EXEC
Command History
Usage Guidelines Use this command to verify the system configuration.
Examples The following example shows how to display optical filter information. (See Table A-1 6 for field
descriptions.)
Switch# show optical filter
aggregate filtered
interface channel(s) interface
----------------- ----------- ------------
Wdm0/0 0 Oscfilter0/0
Wdm0/0 1 Filter0/0/0
Wdm0/0 2 Filter0/0/1
Wdm0/0 3 Filter0/0/2
Wdm0/0 4 Filter0/0/3
Wdm0/1 0 Oscfilter0/1
Wdm0/1 1 Filter0/1/0
Wdm0/1 2 Filter0/1/1
Wdm0/1 3 Filter0/1/2
Wdm0/1 4 Filter0/1/3
detail Shows optical patch connections between the OADM modules in addition
to the channels supported. This information displays only if the patch
connection has been configured with the patch command.
Release Modification
12.1(10)EV2 This command was introduced.