A-190
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
System Management Commands
reprogram
To upgrade the FPGA or functional image on a selected car d from a fl as h file, u s e t he re program
privileged EXEC command.
reprogram flash-file-name {slot [subcard] | rommon | sby-rommon}
Syntax Description
Defaults None.
Command Modes EXEC
Command History
Usage Guidelines T hi s co mman d th e im age to t he co ntroller you select. It also resets the selected controller, which causes
active connections and configurations to be lost.
Caution Do not power-cycle the system during a reprogram operation because dam age can occur to
the controller you are reprogramming. If you power-cycle the system w hile reprogramming
is in progress, you also might be unable to boot the system.
Examples The following example shows how to reprogram the image on the ESCON multiplexing line card in
slot 3.
Switch# reprogram bootflash:fi-ons15530-escon.A.2-36.exo 3
flash-file-name Specifies the name of the image to download, which can be in the
CompactFlash Card or bootflash.
slot Specifies the physical slot number of the controller you want to reprogram.
The slot number ranges from 0 to 10.
subcard Indicate a subcard in a slot for half-width modules or in a carrier
motherboard. The subcard number ranges from 0 to 3.
rommon Specify reprogramming the ROMMON (ROM monitor) image of the active
CPU switch card.
sby-rommon Specify reprogramming the ROMMON image of the standby CPU switch
card.
Release Modification
12.1(10)EV2 This command was introduced.