Cisco Systems 15530 standby privilege-mode enable

A-171
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
CPU Switch Module Redundancy Commands
standby privilege-mode enable
To enable access to privileged EXEC mode from the standby CPU switch module CLI, use the standby
privilege-mode enable command. To revert to the default state, use the no form of the command.
standby privilege-mode enable
no standby privilege-mode enable
Syntax Description This command has no other arguments or keywords.
Defaults Disabled
Command Modes Redundancy configuration
Command History
Usage Guidelines This command must be entered on the active CPU switch module CLI before you can access privileged
EXEC mode on the standby CPU switch module CLI.
Examples The following example shows how to enable access to privileged EXEC mode on the sta ndby CPU
switch processor module.
Switch(config-red)# standby privilege-mode enable
Related Commands
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
show redundancy Displays CPU switch module redundancy status and configuration
information.