Cisco Systems 15530 debug driver ten-gigabit trunk

A-53
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Debug Commands
debug driver ten-gigabit trunk
To enable 10-Gbps ITU trunk card driver debugging, use the debug driver ten-gigabit trunk command.
To disable 10-Gbps ITU trunk card driver debugging operations, use the no form of this command.
debug driver ten-gigabit trunk {errors | events}
no debug driver ten-gigabit trunk {error | events}
Syntax Description
Defaults Disabled
Command Modes Privileged EXEC
Command History
Usage Guidelines Use this command to activate 10-Gbps ITU trunk card driver debugging.
Examples The following example shows how to activate 10-Gbps ITU trunk card driver debugging.
Switch# debug driver ten-gigabit trunk events
Related Commands
errors Enables debugging for NVRAM driver error conditions.
events Enables debugging for SRC driver events.
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
debug aps Enables debugging of APS and APS Channel Protocol activity.
debug cpu Enables debugging of IPC initialization and switchover events.
debug diag online Enables debugging of the online diagnostics.
debug driver voa Enables debugging of OSCP activity.
debug ports Enables debugging of optical port activity.
debug redundancy Enables debugging of redundancy software o per ation .