A-131
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
OSCP Commands
Related Commands
inactivity factor Shows the inactivity factor. The system uses the inactivity factor to
determine when a link has gone down. A link is returned to the
“attempt” state if the system has not received an OSCP Hello packet
for a certain time interval. That time interval is equal to the Hello
inactivity factor multiplied by the Hello interval from the Hello packet
most recently received from the remote system. The range of
inactivity factors is from 2to 50. The default inactivity factor is 5.
Hello hold-down Shows, in milliseconds, how long to wait before sending another
OSCP Hello packet. This avoids excessive generation of OSCP Hello
packets.
Supported OSCP versions Shows the OSCP versions supported.
TableA-22 show oscp info Field Descriptions (continued)
Field Description
Command Description
oscp timer hello holddown Modifies the OSCP timer Hello hold-down interval.
oscp timer hello interval Modifies the OSCP timer Hello interval.
oscp timer inactivity-factor Modifies the OSCP timer inactivity factor.