Cisco Systems 15530 topology neighbor disable

A-238
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Topology Neighbor Commands
topology neighbor disable
To remove an interface from the network topology, use the topology neighbor disable command.
topology neighbor disable
Syntax Description This command has no other arguments or keywords.
Defaults None
Command Modes Interface configuration
Command History
Usage Guidelines Use this command to remove an interface from the network topology, whether it was added with the
topology neighbor command or the topology neighbor cdp command.
Examples The following example shows how to remove an interface from the network to pology.
Switch# configure terminal
Switch(config)# interface wdm 0/2
Switch(config-if)# topology neighbor disable
Related Commands
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
show topology neighbor Displays the system connections.
topology neighbor Adds a static entry for an interface to the network topology.
topology neighbor cdp Enables CDP on the interface.