A-79
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Interface Configuration Commands
laser shutdown
To turn off the laser on a module supporting the in-band message channel, use the laser shutdown
command. To turn the laser on, use the no form of this command.
laser shutdown
no laser shutdown
Syntax Description This command has no other arguments or keywords.
Defaults Disabled
Command Modes Interface configuration
Command History
Usage Guidelines Use this command to explicitly shut down the laser. The interface shutdown command disables data
traffic; however the control traffic carried over in-band message channel continues to flow. Use this
command to turn off the laser and stop all traffic.
Note The interface shutdown command must precede the laser shutdown command. To bring the interface
administratively up, the no laser shutdown must precede the no shutdown command.
Note If you turn off the laser on an interface and save the configuration to the startup configuration, the
interface comes up with the laser turned off when the system boots.
Note A 10-Gbps laser on a waveethernetphy interface must warm up for 2 m inute s b ef ore c arr ying t raffic.
Examples The following example shows how to turn off the laser on a waveethernetphy i nte rface .
Switch(config)# interface waveethernetphy 4/0
Switch(config-if)# laser shutdown
Related Commands
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
show interfaces Displays interface information.