A-178
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
SNMP Commands
snmp-server enable traps rf
To enable SNMP trap notification for CPU switch module redundancy activity, use the snmp-server
enable traps rf command. To disable this feature, use the no form of the command.
snmp-server enable traps rf
no snmp-server enable traps rf
Syntax Description This command has no other arguments or keywords.
Defaults Disabled
Command Modes Global configuration
Command History
Usage Guidelines Use this command to enable the SNMP trap notifications defined in the Redundancy Facility MIB
(CISCO-RF-MIB).
The snmp-server enable traps patch command is used in conjunction with the snmp-server host
command. For a host to receive SNMP trap notifications for patc h co n nectio n a ctivity, the snmp-server
enable traps patch command and the snmp-server host command for that host must be enabled.
Examples The following example shows how to enable SNMP trap notifications fo r CPU swi tch m odule
redundancy activity.
Switch# configure terminal
Switch(config)# snmp-server enable traps rf
Related Commands
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
redundancy Enters redundancy configuration mode.
show redundancy Displays redundancy configuration information and status.
show running-config Displays the configuration information currently running on the s ystem .
snmp-server host Specifies the recipient for SNMP notification messages.