A-38
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
APS Commands
The following example shows how to display APS information for an APS group with the default group name (the default working interface). (See Ta ble A-1 for field descriptions.)
Switch# show aps group Wavepatch8/0/0
APS Group Wavepatch8/0/0 :
architecture.: 1+1, remote prov: 1+1
span.........: end-to-end
prot. mode...: network side splitter
direction....: prov: uni, current: uni, remote prov: uni
revertive....: no
aps state....: enabled (associated)
request timer: holddown: 5000 ms, max: 15000 ms, count 2
msg-channel..: auto (up on osc)
created......: 5 minutes
auto-failover: disabled
transmit k1k2: sf-lp, 0, 0, 1+1, uni
receive k1k2: sf-lp, 0, 0, 1+1, uni
switched chan: 0
channel ( 0): Wavepatch8/0/1 (STANDBY - UP)
: channel request: no-request
: transmit request: no-request
: receive request: no-request
channel ( 1): Wavepatch8/0/0 (ACTIVE - UP)
: channel request: no-request
: switchover count: 1
: last switchover: 1 hour, 0 minutes
The following example shows how to display APS information for a transparent interface. (See Table A -1 for field descriptions.)
Switch# show aps interface transparent 8/0/0
APS Group blue :
architecture.: 1+1, remote prov: 1+1
span.........: end-to-end
prot. mode...: client side y-cable
direction....: prov: uni, current: uni, remote prov: uni
revertive....: no
aps state....: enabled (associated)
request timer: holddown: 5000 ms, max: 15000 ms, count 2
msg-channel..: auto (up on osc)
created......: 5 minutes
auto-failover: disabled
transmit k1k2: sf-lp, 0, 0, 1+1, uni
receive k1k2: sf-lp, 0, 0, 1+1, uni
switched chan: 0
channel ( 0): Transparent10/0/0 (STANDBY - UP)
: external request: no-request
: transmit request: no-request
: receive request: no-request
channel ( 1): Transparent8/0/0 (STANDBY - UP)
: external request: no-request
: switchover count: 0
: last switchover.: never