A-102
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Interface Configuration Commands
Examples The following example shows how to display transparent interface information. (See Table A-1 3 for
field descriptions.)
Switch# show interfaces transparent 3/0/0
Transparent3/0/0 is administratively up, line protocol is up
Signal quality: Loss of lock
Encapsulation: Sonet Rate: oc3
Signal monitoring: on
Forward laser control: Off
Configured threshold Group: None
Threshold monitored for: BIP1 error
Set threshold SF:10e-5 SD:10e-7
Section code violation error count(bip1): 61286
Number of errored seconds(es): 2
Number of severely errored seconds(ses): 2
Number of severely errored framing seconds(sefs): 273
Number of times SEF alarm raised: 0
Number of times SF threshold exceeded: 0
Number of times SD threshold exceeded: 2
Loopback not set
Last clearing of "show interface" counters never
Hardware is transparent
voain slot/subcard/0.subinterface Shows the voain interface information.
voaout slot/subcard/0 Shows the voaout interface information.
wave slot/0 Shows the wave interface information.
wavepatch slot/0/port Shows the wavepatch interface information.
waveethernetphy slot/0 Shows the waveethernetphy interface information.
waveethernetphy slot/0.subinterface Shows the waveethernetphy subinterface information.
wdm 0/subcard Shows the wdm interface information.
TableA-12 Interface Types for the show interfaces Command
Type Description
TableA-13 show interfaces transparent Field Descriptions
Field Description
Transparent 3/0/0 is administratively up Shows the interface state, either up or down.
line protocol is up Shows the state of the line protocol, either up or down.
Signal quality Shows signal quality.
Encapsulation Shows the encapsulation for the interface.
Rate Shows the encapsulation rate—either the configured
clock rate or the protocol clock rate, if the protocol
supports multiple rates.
Signal monitoring Shows whether signal monitoring is enabled.
Forward laser control Shows whether forward laser control is enabled.
Configured threshold group Shows whether a threshold group has been configured
for the interface.
Threshold monitored for Shows what the threshold group is monitored for.