A-152
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
CPU Switch Module Redundancy Commands
redundancy switch-activity
To manually switch activity from the active CPU switch module to the standby CPU switch module, use
the redundancy switch-activity command.
redundancy switch-activity [force]
Syntax Description
Defaults The active CPU switch module switches over only if the standby CPU switch module has reached
hot-standby mode.
Command Modes Privileged EXEC
Command History
Usage Guidelines T his command must b e issued on the ac tiv e CPU switch mo dule. It tak es effect if the CPU switch module
is in a state to allow switchover; that is, the standby CPU switch module is in the “Standby Hot” state
and platform software is not temporarily disallowing the switchover.
Examples The following example shows how to switch activity to the standby CPU switch module.
Switch# redundancy switch-activity
Preparing to switch activity
This will reload the active unit and force a switch of activity [confirm] y
01:40:35: %SYS-5-RELOAD: Reload requested
Related Commands
force Forces a switch of activity even when the standby CPU switch module has
not reached the hot-standby state, or if some other software condition is
preventing a normal switchover from occurring.
Release Modification
12.1(10)EV2 This command was introduced.
Command Description
maintenance-mode Enables or disables CPU switch module redundancy synchronization.
redundancy reload peer Reloads the standby CPU switch module.
redundancy reload shelf Reloads both CPU switch modules in the shelf.
reload Reloads the active CPU switch module.
show redundancy Displays CPU switch module redundancy status and configuration
information.