A-99
Cisco ONS 15530 Configuration Guide and Command Reference
78-14227-01, Cisco IOS Release 12.1(10)E2
AppendixA Command Reference
Interface Configuration Commands
The following example shows how to display hardware register information about a transponder line card wave interface. (See Tab le A-11 for field descriptions.)
Switch# show controllers wave 3/1
Controller info for Wave interface Wave3/1
LRC start addr = 0x200000
hardware port = 2
RCI1 monitor................:enabled
port 2 intr SRC/CPU.........:enabled
CPU0 MSB MAC................:0x0
CPU0 LSB MAC................:0x0
CPU1 MSB MAC................:0x0
CPU1 LSB MAC................:0x0
port error register.........:0x10000
port ctrl msg intf mask.....:0xF00FC00A
port APS port fail mask.....:0x0
HuJr start addr = 0x250000
Optics control and status:
auto fail-over indication...:normal
optical switch alarm........:clear
line laser degrade alarm....:clear
optical switch position.....:Mux 1
loss of light...............:no
BLC and LAS.................:disabled
LSC.........................:disabled
quick shutdown (FLC)........:disabled
CDR control and status:
loss of lock................:yes
loss of lock enable.........:enabled
SerDes control and status:
diags loop back.............:disabled
line loop back..............:disabled
GE handler control and status:
loss of sync................:no
loss of sync enable.........:disabled
FC/ESCON handler control and status:
loss of sync................:no
loss of sync enable.........:disabled
SONET handler control and status:
loss of frame...............:yes
severely errored frame......:yes
LOF enable..................:disabled
SEF enable..................:disabled
LOF enable Indicates whether loss of frame monitoring is enabled via the monitor enable command.SEF enable Indicates whether severely errored frame monitoring is enabled via the monitor enable command.

TableA-11 show controllers Command Field Descriptions for Transparent Interfaces (continued)

Field Description